Follow by Email

Wednesday, 21 December 2011

The Big Red Button

 Although I have a kill switch on the handle bar switch block I'm still having the big red kill button. The back cover plate has been cut from an old metal storage shelf , it also has the ignition on/off switch fuse and the 8g inertia switch mounted on the other side  

 Here is the rear view of the mounting plate showing the main isolator "Big Red Button" the 8 to 20g inertia switch, ignition switch and fuse holder. The "On" cct. has it's own 12 volt power supply operating the main contractor for the traction cct.

Basic cct diagram
 Rear of tank filled and sanded tread for primers

Thursday, 8 December 2011

Not much time but new stuff done

                                     Potbox, Hall effect and main contactor installed
                                                    Cable from original throttle
                                       Front disc calliper recon and installed
                          Headlight, original reinstalled, to damm dear for a new one
                           rear brake now cable operated with shortened clutch cable

                             Fuel tank bottom cut out for weather proofing electrical gear

                                 First application of fibre glass to Finnish off end

                                           Looking up into cutaway tank on bike
                       Speedo and custom bracket from GN250 1982 Suzuki, GN was the single cylinder